This is what you'd call a standard kind of Barjo cage but it also has a back section that joins onto the cage 1. That has two side doors so entrance/exit is made thru the rear doors of car if divider is in place. You can take the divider of front/back out and so the two cages make one huge space so all dogs can exit thru the rear of vehicle. Both cages have thick rubber mats in.
It was originally made for an Audi A4 1999 V reg. I have also had it in a Mazda (both sections) and I've also had it in a Nissan X-trail which I've just sold...sadly it does not fit in my new Volvo.
I have several photo's of it and can supply any measurements required. The only one I have off the top of my head is the height which is 29". The cage does dismantle and can be assembled from inside the car if your opening is a bit too small. Would like £300 for this as it's basically two cages or very near offer. Located In Wiltshire close to Chippenham and about 9 miles from Junction 17 of M4.

Reduced to £275.

Now sold.